NordCap Flake ice maker SPH 120 W, water-cooled, up to 124 kg/24 h, with 55 kg storage tank

Product details

The NordCap Flake Ice Maker SPH 120 W produces water-cooled up to 124 kg of pourable flakes and break ice in 24 hours and stores it in a container for 55 kg.

The SPH 120 W is a water-cooled flake ice maker for flake and break ice production and is installed as a stand-up unit with a storage container for 55 kg of ice. The output is up to 124 kg flake ice in 24 hours, produced with an ideal temperature of -0.5 °C. The ice is formed crystalline and always can be poured. The outside dimensions are 920 x 594 x 778 mm (W x D x H). The unit can be operated up to 43 °C ambient temperature, whereby the production quantity can vary depending on the ambient temperature.

Ice production runs through a fully automatic production control system. The heart of the system is a stainless steel screw cylinder in combination with a special cylindrical evaporator that generates the flakes ice. Dirt-prone components can be expanded from the front, which makes cleaning and maintenance easier. The cleaning and maintenance instructions of the manufacturer must be observed. The daily amount of ice produced can also vary depending on the water supply temperature.

All water-bearing parts are made of food-safe materials. The outer panel is made of stainless steel 1.4509 and has a rounded edge protection, the inner container is made of polyethylene and is deep drawn in a pcs. The net weight is 67 kg. The standard accessories include 1 x ice shovel, 2 x drain hose and 2 x connection hose. A wall distance of at least 152 mm must be planned on the construction side.

The refrigeration machine is cooled by water cooling, R-290 (propane) is used as a refrigerant with a GWP100 (AR5) of 3. The unit is plug-in for 230 V with a connection value of 0.45 kW and a protection of 10.0 A, the energy consumption is indicated at 10.00 kWh per 24 hours. The water inflow may be 5 to 38 °C, the water pressure must be between 1 and 5 bar. On the construction side 2 x water inflow and 2 x water drain are required.

• 1 x Flake ice maker SPH 120 W with storage tank 55 kg
• 1 x ice shovel
• 2 x drain hose
• 2 x connecting hose

• Manufacturer item number: 41321202902
• Installation type: Stand-up equipment
• Ice form: flakes and break ice, crystalline shaped, always pourable
• Power: up to 124 kg flake ice / 24 h
• Production temperature: -0.5 °C (ideal temperature)
• Storage tank: 55 kg, inner container polyethylene, deep drawn in a pcs
• External dimensions (W x D x H): 920 x 594 x 778 mm
• Type of cooling (machine): water cooling
• Refrigerant: R-290 (propane), GWP100 AR5 3
• Device operation: up to 43 °C ambient temperature (production quantity may vary depending on ambient temperature)
• Connection: ready to plug, 0,45 kW, 230 V, 1-phase, 50 Hz
• Hedging: 10,0 A
• Energy consumption: 10,00 kWh/24 h
• Water inflow: 5 to 38 °C, water pressure 1 to 5 bar
• Construction side connections: 2 x water inlet and 2 x water outlet
• Outside facing: stainless steel 1.4509, rounded edge protection
• Weight: 67 kg net
• Country of origin: Italy

• Flake and break ice, crystalline shaped and always pourable
• Storage tank for 55 kg with deep-drawn polyethylene inner container
• Fully automatic production control
• stainless steel screw cylinder and special cylindrical evaporator
• Dirt prone components from the front expandable
• Water guide parts of food-based materials
• Water cooling of the refrigerator, natural refrigerant R-290
• Plug ready for 230 V

Notes on establishment and operation

When setting up the equipment, a wall distance of at least 152 mm is to be planned on the construction side. On the construction side, 2 x water inlet and 2 x water outlet are required. The daily amount of ice produced can vary depending on the water inlet temperature.

Operating instructions

Download user manual (PDF)

Energy labelling

Commercial ice makers are currently not subject to EU energy label marking requirements (no EPREL registration).

Product safety (GPSR)

Manufacturer: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany
Responsible person in the EU: NordCap GmbH & Co. KG, Thalenhorststraße 15, 28307 Bremen, Germany, telephone: +49 421 48557-0, e-mail: produktsicherheit@nordcap.de

Safety instructions: Read and follow the instructions provided with all safety and warning instructions before installation, connection and use.